Publicité
Les langues disponibles
Les langues disponibles
EN
User Manual
Supported Devices
Stanley Smart Measure Pro currently supports the
following:
Apple iOS
Google Android
*Must support Bluetooth Smart (v.4 – low
energy)
For list of compatible devices, visit:
www.stanleysmartmeasurepro.com
*The clamp included with your Smart Measure
Pro will fit on any device that is between 45mm
and 80mm wide (inclusive of any case that may
be on the device).
Smart Measure Pro Functionality
The Smart Measure Pro app contains core
measurement functionality. As the Smart Measure
Pro app evolves, each app update will introduce
additional features and capabilities.
Smart Measure Pro has the following
functionality:
Range
6ft-492ft (1.8m-150m)
Output
PDF, JPG, Smart Measure Pro File
Share Options
Email, Message, Cloud Storage
Mounting Your Smart Measure Pro
1. Centrally place Smart Measure Pro on the
back of your device, as close to the camera as
possible.
2. Ensure that Smart Measure Pro does not
obstruct the view from your camera or flash.
6
iOS 8.0 or later
v4.4 or later
3. Firmly squeeze the clamp mechanism onto
your device.
4. To verify, start your device's camera app and
validate the correct placement.
5. To remove your Smart Measure Pro, press
the clamp release button. The clamp will
automatically open and release your device. We
recommend compressing the clamp arms when
your Smart Measure Pro is not in use.
NOTE: Ensure that your Smart Measure Pro is
mounted securely to your device before taking
measurements, it should not move or rock. Smart
Measure Pro should sit flat against the back of
your device and align squarely with the camera
of your device.
Publicité
