Finishing; Secondary Air Tubes - Napoleon Oakdale EPI3-1 Série Manuel D'installation Et D'opération

4.1

secondary air tubes

A.
Starting at the back with the shortest tube and working forward, install the secondary air tubes by fi rst
inserting the tube into the hole on the left side of the fi rebox and then into the corresponding hole on the
right side. Next, align the notch with tab, and slide the tube all the way to the right (FIG 1).
B.
Insert the cotter pin to secure the tube in place (FIG 2).
note:
It is recommended to leave the front tube out until the fi bre baffl e has been installed.
Fig. 1
Fig. 2
4.0 fi nishing
15
W415-2007 / A / 10.21.19
EN