Selecting A Device To Control; Programming The Remote Control For A Tv (Device Code) - HP MediaSmart Connect x280n Guide D'installation Et Manuel De L'utilisateur

Selecting a Device to Control

Use the remote control to operate the HP MediaSmart Connect or
another controlled device. To select the device you want to
control, press the Device button on the remote control one or more
times to light the device indicator.
To use the remote control, point the remote control at the remote
control sensor on the front of the controlled device. The
HP MediaSmart Connect sensor is in the middle of the front of the
device, in the lower section of the Status indicator. Simply point
the remote control at the front of the device.
Chapter 3: Using the Remote Control
To program the remote control for a specific device, see the next
section, "Programming the remote control for a TV (device code)"
on page 44. To use the Media menu, see "Using the Media
Menu" on page 50.
Programming the remote control
for a TV (device code)
Any device can be programmed for each remote control indictor,
except the HP MediaSmart Connect indictor: TV, CBL, DVD,
and AUX.
Each programmed device can have a second device programmed
for volume mapping, which adjusts the sound at the second
programmed device such as an external sound system. See
"Programming a second device for volume mapping" on
page 47.
44