HP MediaSmart Connect x280n Guide D'installation Et Manuel De L'utilisateur page 40

Back
Power HDMI
Reset
Digital audio
output (optical)
Back Description
Reset Press this button to restart the device.
Power Connect the included AC power adaptor.
NOTE: Use only the AC power adaptor
provided.
Digital audio Connect an optical cable for digital sound out
output (optical) to an external sound system.
Chapter 3: Using the Remote Control
Component
LAN
Video Y, Pb, Pr
Analog Audio
Right and Left
Back
HDMI
Component
Video
Y, Pb, Pr
Analog Audio
R and L
LAN
USB
USB
IMPORTANT: Wireless local area network (LAN)
!
antennas are internal to the HP MediaSmart Connect
and can connect the device to your wireless home
network.
Description (continued)
Connect the included HDMI cable to the HDTV.
Connect the green, blue, and red Component
Video cables (and left-right analog audio) to
the HDTV when not using HDMI.
Connect left-right audio cables for stereo sound
out to an optional external (analog) audio
system or, when using the Component Video
connectors, to the HDTV.
Connect an Ethernet cable to your wired home
network when not using a wireless connection.
Connect an optional USB-based mass storage
device.
40