Installation Steps - HP MediaSmart Connect x280n Guide D'installation Et Manuel De L'utilisateur

Installation Steps

Step 1:
Connect your HDTV to your HP MediaSmart
Connect.
Select the location to place the device.
Connect the device to the HDTV, and to optional equipment.
If you are using a wired (Ethernet) connection, connect the
device to your home network.
Connect the device to power.
Install the remote control batteries.
See "Step 1: Connect Your HDTV to Your HP MediaSmart
Connect" on page 16.
Step 2:
Follow the setup wizard on your HDTV.
Select the input on the TV for the HP MediaSmart Connect.
Select the TV resolution by following the onscreen instructions.
See "Step 2: Follow the Setup Wizard on Your HDTV" on
page 22.
Getting Started
Step 3:
On your computer, insert the Installation CD.
At the computer, insert the Installation CD from the box, and then
follow the wizard to:
Install the MediaSmart software (automatic).
Authorize Windows Media Player 11 to share media with the
HP MediaSmart Connect.
Register your device with HP.
Create your free HP Online Media Services account.
See "Step 3: On Your Computer, Insert the Installation CD" on
page 26.
Step 4:
Return to your HDTV to complete the setup.
Finalize the set up of your network.
Set up the Extender for Windows Media Center (optional).
See "Step 4: Return to Your TV to Complete the Setup" on
page 28.
Begin playing and enjoying the media available through your
HP MediaSmart Connect. See "Enjoying" on page 29.
15