HP MediaSmart Connect x280n Guide D'installation Et Manuel De L'utilisateur page 39

Front
USB
TV Resolution
Remote Control
Button, Indicator
Sensor
Front Description
TV resolution Selects and indicates the HDTV resolution. If
(button and you press the button and see a blank screen,
indicator) your TV may not support the selected
resolution; press the button again until you see
the HP MediaSmart Connect screen.
USB Connect an optional universal serial bus
(USB)-based mass storage device.
Chapter 3: Using the Remote Control
Status Indicator
Eject
HP Pocket Media
Drive Bay
Front Description (continued)
Status indicator Shows the current device status:
Lights blue: Device is on.
Blinks blue: Device is in standby mode.
Lights amber: Device is turning on.
Lights red: An error occurred.
Remote control Point the remote control at this area to operate
sensor the device.
HP Pocket Insert an optional HP Pocket Media Drive
Media (PMD).
Drive bay
Eject (button) Ejects the HP PMD from the bay.
NOTE: Do not eject the drive when its
indicator is lit.
39