Connecting Power; Installing Remote Control Batteries - HP MediaSmart Connect x280n Guide D'installation Et Manuel De L'utilisateur

Connecting power

Connect the AC power adaptor to the connector on your device
and to the AC power outlet. The HP MediaSmart Connect
turns on.
IMPORTANT: The HP MediaSmart Connect has no Power
!
button; press the On/Off button on the remote control
to put the device into standby mode and awaken it, or
unplug the power adaptor to turn it completely off.
Getting Started

Installing remote control batteries

Insert two AA batteries into the remote control, ensuring that you
place them with the polarity properly aligned.
1 Press and open the cover on the rear of the remote control.
2 Insert the batteries into the remote control, and ensure that
you match polarities.
3 Close the cover.
20