Hbt - Phrase De Supervision Hearbeat; Hdg - Cap, Déviation Et Variation; Hdm - Cap, Magnétique; Mtw - Température De L'eau - Furuno FAR-1513 Manuel D'installation

HBT – Phrase de supervision Hearbeat
$**HBT,x.x,A,x*hh<CR><LF>
1 2 3
1. Configured repeat interval (1 - 999, null)
2. Equipment status (No use)
3. Sequential sequence identifier (0 - 9)
HDG – Cap, déviation et variation
$**HDG,x.x,x.x,a,x.x,a*hh<CR><LF>
1 2 3 4 5
1. Magnetic sensor heading, degrees (0.00 - 360.00)
2. Magnetic deviation, degrees (0.00 - 180.00)
3. E/W
4. Magnetic variation, degrees (0.00 - 180.00)
5. E/W
HDM – Cap, magnétique
$ ** HDM, x.x, M *hh <CR><LF>
1 2
1. Heading, degrees (0.00 - 360.00)
2. Magnetic (M)
HDT – Cap, vrai
$**HDT, xxx.x,T*hh<CR><LF>
1 2
1. Heading, degrees (0.00 - 360.00)
2. True (T)
MTW – Température de l'eau
$**MTW,x.x,C<CR><LF>
1 2
1. Water temperature (-9.994 - 99.994)
2. C=degrees C (fixed)
MWV – Vitesse et angle du vent
$**MWV,x.x,a,x.x,a,A*hh<CR><LF>
1 2 3 4 5
1. Wind angle, degrees (0.00 - 360.00)
2. Reference (R/T)
3. Wind speed (0.00 - 9999.94)
4. Wind speed units (K/M/N/S)
K=km/h M=m/s N=Knots S=Statute mile
5. Status (A)
*No use for
Type-IMO
*No use for
Type-IMO
ANNEXE 2 INTERFACE NUMÉRIQUE
AP-7