Switching Off The Power Generator; 230 V Ac Sockets - Walter WWS-4TS Notice D'utilisation

Using the power generator

Switching off the power generator

NOTE!
Allow the power generator to run for one minute without load before
turning it off.
• Switch off the connected electrical devices.
• Unplug the mains plug from the socket
• Push the overload protection switch
• Push the On/Off switch of the generator
• Close the petrol valve
turn it counter-clockwise until the
side-piece points horizontally to the
right.

230 V AC sockets

WARNING!
The rated power of the connected load should not exceed the rated
power of the generator. Check the rating plate of the electrical
equipment that you want to connect.
• The power generator has two sockets
13
.
• Connect your electrical equipment to
the socket and use it as usual.
68
K640061_Anleitung_DE_EN_FR_CZ_SI.indb 68 K640061_Anleitung_DE_EN_FR_CZ_SI.indb 68
13
.
11
down to "OFF" position.
15
18
. To do so,
to "OFF".
18
13
08.02.2021 14:53:28 08.02.2021 14:53:28