Assembling The Wheels; Fixing/Loosening The Handle - Walter WWS-4TS Notice D'utilisation

Assembling the wheels

CAUTION!
Wear protective gloves.
• Guide the shaft
side through the provided holes until
it comes out on the other side.
• Start on one side and insert a shim
8
on the shaft.
• Tilt the power generator slightly and
insert a wheel
such that the longer part of the hole
housing faces inwards.
• Secure the wheel by inserting the
7
cotter pin
• Bend the ends of the cotter pin, e. g.
using pliers.
• Repeat the procedure for the other side and for the second shaft.

Fixing/loosening the handle

• Fold the handle
keep it in this position such that the
housing and handle holes line up.
• Guide the fixing pin
respective side through the holes
provided.
• Ensure that the pins for fixing the
handle go through both the fixture
and handle housing.
K640061_Anleitung_DE_EN_FR_CZ_SI.indb 61 K640061_Anleitung_DE_EN_FR_CZ_SI.indb 61
10
starting from the
5
onto the shaft
through the hole.
1
backwards and
9
on the
10
8
7
1
Assembly
5
9
61
08.02.2021 14:53:25 08.02.2021 14:53:25