Troubleshooting; Possible Causes - VISIOMED bewell connect MyPeriTens Mode D'emploi

Relax time 1-60 s
Cycle period 1-99
Preset programs More than 16 programs
Vibrations massage output parameters
Output intensity level 1-10 levels
Preset programs More than 16 programs
Working noise < 60dB (Measuring distance is 50 cm, back ground noise < 40db)
Classification Classe IIa
Applied part type BF
IP56
Dimensions Ø31 x 128.5 mm / Ø1.2 x 5 in
Weight 65 g / 0.14 lb
Rated input - 100-240 V
adapter
Rated output - 5 V-300 mA
adapter
Frequency - adapter 50-60 Hz
Wireless maximum 10 m (in an open environment)
separation distance
Wireless 3 m
recommended
separation distance
Normal working Temperature: 5°C - 40°C / 41°F - 104°F
conditions Humidity: 0-93% RH
Atmospheric pressure: 70-106Kpa
Storage and Temperature: -10°C - 50°C / 14°F - 122°F
transportation Humidity: 0%-9% RH
conditions Atmospheric pressure: 70-106Kpa
Technology Bluetooth 4.0 Smart Ready
Battery 3.7 V / 250mAh Li-ion
Frequency 2400-2483.5 MHz
Channel bandwidth 2 MHz (-20 dB)
26 BewellConnect - BW-PFX1 - User Manual - 072017v1
Types of spread FHSS
spectrum
Modulation type GFSK
Number of channels 40
Channel spacing 2 MHz
Channel frequency 0-39 Channel 2.402-2.480 GHz
Dwell time (if FHSS) 400 ms
Hopping rate 1600 Hz
(if FHSS)
Maximum output 4 dBm
powers
Accessories Main device, charging box, user manual, USB cable, adapter
provided

7. TROUBLESHOOTING

ERROR

POSSIBLE CAUSES

LED light on the main device The battery is dead
flashes orange, and then turns
off automatically.
LED light on the main device Low power
flashing orange in working
mode.
Stimulation is uncomfortable. Is the intensity too high or
too low?
The electrode poor contact
with vaginal of subjet
The electrode has poor
contact with the vagina
BewellConnect - BW-PFX1 - User Manual - 072017v1
SOLUTION
Charge the device.
Battery power is at less
than 25%. After use, charge
the device.
Adjust the output
intensity.
Use a lubricant.
Adjust the placement
according to this user
manual.
27