Power On/Off; Download Application; How To Maintain And Store The Unit; Cleaning - VISIOMED bewell connect MyPeriTens Mode D'emploi

3. Insert the USB plug into the socket of the adapter and insert the adapter into a wall socket.
When charging, the indicator light of the storage case turns orange, and it will turn green
when the battery is fully charged.
4. When charging is complete, remove the micro-USB plug from the micro-USB socket of the
storage case.

4.1.3. POWER ON/OFF

1. Power on
Take the main device from the storage case and turn on the device by pressing the Power
button. The blue light will flash, and the device will be in standby mode.
2. Power off
- Device will automatically power off if there is no Bluetooth connection within 5 minutes under
standby mode or with no connection after 5 minutes without treatment.
- In the Power ON mode. Turn off the main device by holding the power button.
- When the orange light flashes to indicate low battery, the device will power off after 10 seconds.
Application will also display a pop-up to remind user of low battery during treatment session.

4.2. DOWNLOAD APPLICATION

The following information may be updated.
Download the MyPeriTens application to your smartphone or tablet via the App Store
or Google Play. Make sure that the operating system is up to date (iOS 8.0 or later Or
Android 4.3 or later).
bw
We invite you to read the user manual of the application carefully for more information.
PERITENS
(on the website www.bewell-connect.fr) about exercices and function of the device.

5. HOW TO MAINTAIN AND STORE THE UNIT

5.1. CLEANING

After finishing treatment, close the application, shutdown the device, then remove it.
Before and after each use, clean the probe and silicone sleeve with clean water or mild soap
water. Wipe them with dry and soft cloth.
Store the device in the storage case, always placed in a clean and dry place.
Never immerse the device and the storage case in a liquid.
Do not clean the device in an autoclave or diswasher.
Do not clean with boiling water, corrosive cleaning agent, chemicals. Do not dry with abrasive
materials (Risk of contamination and subsequent infection).
Do not share this device with another user.
24 BewellConnect - BW-PFX1 - User Manual - 072017v1

5.2. MAINTENANCE

Follow the maintenance instructions specified in this manual.
1. Maintenance and all repairs should only be carried out by an authorized agency. The
manufacturer will not be held responsible for the results of maintenance or repairs by
unauthorized people.
2. The user must not attempt any repairs to the device or any of its accessories. Please contact
customer service for repair.
3. Opening of the equipment by unauthorized agencies is not allowed and will terminate any
claim to warranty.
4. Check the device before each use for signs of wear and/or damage. Replace worn items as
required.
5. To ensure the safety and effectiveness of the use, please use the main device and accessories
provided by the manufacturer.
6. If you do not use the machine for a long time, please charge it every 2-3 months to ensure
lithium battery performance.

5.3. DISPOSAL

Please dispose of the device in accordance with the directive 2012/19/EU –WEEE (Waste
of Electronic Equipment). If you have any questions, please refer to the local authorities
responsible of waste disposal. Note that the lithium battery in the probe poses a fire
hazard and may explode if incinerated.

6. SPECIFICATIONS

Product name BewellConnect® MyPeriTens
Model BW-PFX1
Intended use This device is used for the treatment of stress, urge and mixed urinary
incontinence. It allows to rehabilitate weakened pelvic floor muscles
and to relieve pain of these pelvic floor muscles.
Pelvic floor electrical stimulation output parameters
Frequency range 2~100Hz
Pulse width range 50~350 us
Maximum output 80 V at 500 ohm load
voltage
Output intensity level 0~80 levels
Treatment time 1~99 min
Pelvic floor muscle training exercises output parameters
Contract time 1-60 s
BewellConnect - BW-PFX1 - User Manual - 072017v1 25