Technical Specifications; Troubleshooting - VISIOMED BewellConnect MyOxy Mode D'emploi

- Do not sterilize the device in an autoclave, with ethylene oxide or by immersing it in liquid. The
device must not be sterilized.

7. TECHNICAL SPECIFICATIONS

Product name BewellConnect® MyOxy
Model BW-OX1
Classification Classe IIa
Applied part type BF
IP22
Display type LED screen
LED Specifications Wavelength: Red = 660 ±3nm - Infrared = 905 ±10nm
Radiant power : Red = 3.2mW - Infrared = 2.4mW
Dimensions 32 x 32 x 62 mm / 1.3 x 1.3 x 2.4 in
Weight 40 g / 1.41 oz
Display and SpO : Display range : 35 - 99% / Measuring range : 70 - 99%
2
measuring ranges Pulse: Display and measuring ranges: 30 - 250 bpm
Accuracy SpO : 70 - 100% : ± 3%
2
Pulse : ± 2 bpm
Resolution SpO : 1%
2
Pulse : 1 bpm
Normal working Temperature : 5°C - 40°C / 41°F - 104°F
conditions Humidity : 15-93%RH
Storage conditions Temperature : -25°C - 70°C / -13°F - 158°F
Humidity : ≤93%RH
Atmospheric pressure : 86-106Kpa
Technology Bluetooth 4.0 Smart Ready
Battery Lithium 280mAh
Autonomy 400 readings
Automatic shut- 8 seconds
down
22 BewellConnect - BW-OX1 - User Manual - 072017v2
Bluetooth 10m
transmission
distance
Frequency 2400 - 2483.5MHz
USB USB port 2.0
Accessories Pulse oximeter, instruction manual, protective pouch, USB cable
provided

8. TROUBLESHOOTING

If one of the following issues arises when using your MyOxy, consult this trouble-shooting
guide. If the problem continues, please contact our customer service department at +33 892
350 366 (0,40€/mn).
ISSUE POSSIBLE CAUSE
Sp0 or PRbpm Your finger must be
2
do not appear correctly inserted.
correctly
SpO reading
2
too small to be
measured.
Sp0 or PRbpm Your finger may not
2
are unstable be inserted deeply
enough.
The user's finger is
trembling or the
user is moving.
Impossible to Battery low
turn on the
Oximeter is damaged Contact customer service
device
BewellConnect - BW-OX1 - User Manual - 072017v2
SOLUTION
Change the position of your finger and try again.
Try several times. If you have any doubts about
a problem related to the product, seek medical
attention
to obtain an accurate diagnosis.
Change the position of your finger and try again.
Try not to move.
Recharge the device with the USB cable
23