Presto 86710 Notice D'installation page 43

INSTALLATION OF THE LEGIONELLOSE 27114-27124 ADAPTATION KIT FOR DL400S WALL-
MOUNTED SATIN GREY AND IVORY WHITE INSTALLED
REMOVE THE COVER USING A STAR-HEADED SCREWDRIVER
Insert the tee between the tube
of 190mm and the tube going
to the priming pump
1 1
3
Cut the tube to the
length of 190mm
Respect the direction of the
non-return check valve
INSTALL THE TUBE (90633) TO THE
DESIRED LENGTH ON THE TEE, YOU
MUST RESPECT THE POSITIONING
OF THE TEE AS DEFINED ON THE
VIEW, THEN INSTALL THE COVER OF
THE KIT AFTER RESPECTING THE
ANTI-PINCHING LOOP OF THE 190mm
TUBE, BY LAYING IT ON ITS RIGHT
SIDE AS SHOWN BY THE ARROW.
THEN INSTALL THE VALVE, THEN
THE TUBE (90633) TO THE DESIRED
LENGTH THAT WILL BE INSTALLED
ON THE DISCHARGE MANIFOLD
(90632).
2
To manifold part No.90632
(not provided)
Ref. 90633 tube per 25M
(not provided)
4