Presto 86710 Notice D'installation page 37

5.1.4 Thermal shock configuration
Enter code
ESC
THERMAL SHOCK CONFIGURATION LEVEL 1
ESC
Number of days (frequency)
between each shock (with or
without flow). Set 0 to
deactivate automatic
shocks.
Setting the starting time of
shocks weekly. Days can
be prohibited with key 2.
Weekly choices of shocks
carried out with or without
flow.
Setting max times for each
phase of the shock.
For shocks with flow, choice
of the flow sequence: A and
B at the same time or A
followed by B.
Depending on the
production capacity of hot
water, the shower groups
can flow together or
successively.
Setting the objective
durations/temperatures of
the shock. Enter increasing
temperature from top to
down.
Check the boxes to control
the duration/temperature
objectives in the pre-
circulation phase and for
each flow of shower groups.