Setting Up The System - Presto 86710 Notice D'installation

5.1.3

Setting up the system:

Each of these elements must be set-up during commissioning, in accordance with the
installation.
Enter code
ESC
!
The inertia duration
corresponds to the time that
the installation, heated to
80°C, takes to return
naturally to 40°C (without
flow). This is a safety period
in case of a fault during a
shock (min. 2 hours).
PHYSICAL SET-UP OF THE INSTALLATION
ESC
DATE/TIME SETTING
LEVEL 0
Definition of the
number of shower
groups divided between
loop A and B
Indicate if the lukewarm
water returns in the hot
water production and if
temperature probes are
connected.
Indicate the presence
detector zones in operation
and define the auxiliary
Operation in normally
open contact except
in emergency stop
Increase
contrast
Reduce
contrast
Set time
Set date
Automatic
summer/winter
time
inputs.
mode..