Sanitas SBM 50 Mode D'emploi page 21

Touch screen activation switch
The device features a touch screen display. To prevent the
screen from being activated accidentally, keep the touch
screen activation switch set to OFF when the device is not in
use. To operate the device, move the touch screen activation
switch to ON. When the touch screen display is touched
(START/STOP button or MEM button), a beep is output.
You can switch off the device at any time by setting
the touch screen activation switch to the OFF position.
Cuff holder
Thanks to the cuff holder on the underside of the device,
you have the option of conveniently storing the cuff. To do
so, push out the cuff holder with both thumbs until it locks
into place (see also Chapter: Inserting battery).
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Pump up, release air (arrow)
6. Memory display, average value ,
morning , evening
of memory space
7. WHO classification
9
8
7
, Number
6
5
8. "Change battery" icon
9. Arrhythmia recognition
PC interface
The blood pressure monitor also allows you to transfer your
measured values to the PC.
To do this, you need a regular USB 2.0 cable [USB type A to
USB Mini-B] and the "HealthCoach" PC software.
The software can be downloaded free of charge from the
download area under Service at www.sanitas-online.de.
system requirements for the "HealthCoach" PC
software
1. Supported operating systems:
• Windows XP SP3
• Windows Vista SP1 or later
• Windows 7
• Windows 7 SP1
1
• Windows 8
2. Supported architectures:
2
• x86 (32 bit)
• x64 (64 bit)
3. Hardware requirements:
3
• Recommended: at least Pentium 1 GHz or faster with at
4
least 1 GB RAM
• Free memory on the primary partition of at least:
– x86 – 600 MB
21