Jet ELITE EVC-400DGSP Mode D'emploi page 5

33. Pull the mains plug if the machine is not in use.
34. Make sure the
The profile must be clamped on left and right side of the
saw blade, by use of both hold-down clamps.
Familiarize yourself with the following safety notices used in this manual:
WARNING: This means that if precautions are not heeded, it may result in serious, or possibly even fatal, injury.
CAUTION: This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.
WARNING:
These symbols blow advise that you follow the correct safety procedures when using this machine.
Read and understand entire user
manual before machine use
Attention:
danger of crushing hands
workpiece is securely
SAVE THESE INSTRUCTIONS
Wear eye protection
Attention:
wait until sawblade has stopped before
opening cover
35. The mitre circular saw is intended for industrial use.
clamped.
Wear ear protection
5
Attention:
high voltage
Attention:
the profile must be clamped
on left and right side of saw
blade, by use of both hold-
down clamps