SOMFY S&SO-RS100 io Notice page 30

EN
2.4.2. Replacing a lost or broken Somfy io-homecontrol
Apply the double cutout only for the end-product
to be reset.
This reset deletes all io-homecontrol
control points; however the sensors, end limit
settings and favourite position are retained.
Position the roller shutter at its half-way position.
1)
Cut the power supply for 2 seconds.
2)
Switch the power supply back on for 5 to
3)
15 seconds.
Cut the power supply for 2 seconds.
4)
Switch the power supply back on: the roller shutter
5)
moves for a few seconds. (If the end product is in
the upper or lower end limit position it will move
Press the PROG button on the new io control
6)
point until the roller shutter moves back and forth:
the new control point is programmed and all the
other io control points are deleted.
2.4.3. Deleting the end limit settings: return to default automatic mode
Position the roller shutter at its half-way position.
1)
Simultaneously press
2)
there is back and forth movement by the roller
shutter.
Simultaneously press
3)
until there is back and forth movement by the
roller shutter:
The end limit settings are deleted.
The control points, the sensors and the favourite
position (my) are still programmed.
Resume the set-up operation (see Set-up section).
-
Apply the double cutout only for the end-product
to be reset.
This reset deletes all programmed control points,
all sensors, all end limit settings and resets the
favourite position (my) for the drive.
Position the roller shutter at its half-way position.
1)
Cut the power supply for 2 seconds.
2)
Switch the power supply back on for 5 to
3)
15 seconds.
Cut the power supply for 2 seconds.
4)
Switch the power supply back on: the roller shutter
5)
moves for a few seconds.
Press the PROG
6)
io-homecontrol control point for 7 s, until there
®
are two back and forth movements by the roller
shutter:
The drive is now reset to its factory
Resume the set-up operation (see Set-up section).
-
28
Copyright © 2014 - 2016 Somfy SAS. All rights reserved.
®
V,
and 5 s, until
my V,
, and
button on the
control point
®
1)
local
3)
ON
5)
ON
6)
1)
2 s,
3)
2
S
1)
3)
ON
5)
ON
Somfy
6)
7
PROG.
2)
OFF
2 s
5 s
4)
OFF
15 s
2 s
my
2)
5
S
2)
OFF
2 s
5 s
4)
OFF
15 s
2 s
my
2
S X
Non contractual images.