Charging The Internal Battery - SilverCrest SLBP 5 A1 Mode D'emploi

Charging the internal battery

NOTE
► Before using the speaker, the integrated battery must be completely
charged.
ATTENTION
► Charge the device's internal battery only in dry indoor spaces.
► Due to the high power consumption, the device must be charged
using a USB mains adapter. Do not charge the device from the USB
port of a PC or notebook.
► Use only the supplied USB charging cable
battery.
► Disconnect the USB charging cable
♦ Make sure that the speaker is switched off. To turn off the speaker,
hold down the
♦ Connect the USB type-A plug of the USB charging cable
plugged-in USB power supply (5 V, at least 950 mA).
♦ Remove the protective cover
DC 5V charging socket
off the device and push it to one side.
♦ Connect the USB-C plug of the USB charger cable
charging socket DC 5V
SLBP 5 A1
q
button for about 2 seconds.
3
on the speaker to get to the USB-C
2
. To do this, pull the protective cover
2
on the device.
e
to charge the integrated
e
when charging is complete.
e
GB │ IE
e
to a
3
to the USB-C
│
13 ■