SilverCrest SLBP 5 A1 Mode D'emploi page 24

♦ Pair the left speaker with a Bluetooth
♦ Start playback from the Bluetooth
NOTE
► If you do not pair the two speakers within 3 minutes, TWS mode on
the left speaker will turn off automatically. If this happens, you will
have to press the TWS button
restarting the pairing process.
► Make sure you position the left and right speakers correctly for
playback.
► The Play/Pause/Forward/Back/Volume/LED lighting buttons work
on both speakers in TWS mode.
Switching off TWS mode
Press the TWS button
♦
off TWS mode. You will hear a beep and LED 2
speakers. Playback is resumed via the left speaker.
NOTE
Press the TWS button
►
TWS mode back on again.
SLBP 5 A1
®
playback device.
®
6
on the left speaker again before
6
on the left or right speaker briefly to switch
6
on the left or right speaker briefly to switch
playback device.
5
goes off on both
GB │ IE │
21 ■