OEM TL 45 Instructions D'utilisation page 142

IMPORTANT!
During baking you can change the parameters by acting on the relevant buttons as explained in the
previous paragraphs (See paragraph "Operator panel").
IMPORTANT!
Perform some baking tests to find the correct parameters.
6.5.3. Opening/closing moving flips
To open/close the moving flips, pls follow the described steps:
ACTON
STEP
Rotate the knob (A) to unlock the flips handling.
1
Using the lever (B) raise/lower the flip (C).
2
Once you have reached the desired position, lock the flip using the knob (A).
3
A
B
Page 142
C
EC-compliant use and warning instructions
CHAPTER 6 – COMMANDS AND USE