Safety Warnings - OEM TL 45 Instructions D'utilisation

7.1. Safety Warnings

ATTENTION!
Before starting any maintenance operation, disconnect the equipment from the power supply.
ATTENTION!
When removing the plug, the operator must be able to check that the plug is indeed disconnected
from any spot he has access to.
ATTENTION!
When the equipment is under maintenance, in order to prevent it from being accidentally switched
on, disconnect power supply and add the following notice:
"ATTENTION! EQUIPMENT UNDER MAINTENANCE"
The accident prevention regulations contained in this paragraph must always be strictly followed, during maintenance
of the equipment, so as to avoid injuries to the staff and damages to the equipments.
Maintenance must only be performed when the equipment is switched off and de-energized.
•
Put specific warnings such as: EQUIPMENT UNDER MAINTENANCE – DO NOT SUPPLY POWER next to the
•
equipment itself.
Only perform maintenance operations (Mechanical, Electrical, Fluidic) you have been previously authorized
•
to perform.
You must be able to use the most suitable and adequate tools to identify the failure and you must be aware
•
of which the most suitable tools are to perform maintenance operations.
Page 146
EC-compliant use and warning instructions
CHAPTER 7 – MAINTENANCE