Costan LION COMPACT Instructions Pour L'utilisateur page 32

2) The display case will not cool properly
• Make sure that the product load is correct and the air slots are not covered;
• defrost and clean it before starting normal operation (see chapter 10);
• Make sure that the case is not exposed to sources of heat or draught;
• Check that the display case is perfectly horizontal by the use of a spirit level. Make certain that ambient conditions
comply with the requirements of page 4.
Should insufficient cooling persist, resort to the nearest after-sales service.
3) The cabinet operates noisily:
• Make sure that screws and bolts are closed tight.
• Check that the display case is perfectly horizontal by the use of a spirit level.
IN CASE OF A GAS LEAK OR FIRE, do not breathe inside the room that houses the display case before
having aired it properly. Turn the display case off by the main switch ahead (see fig. 17). DO NOT USE
WATER BUT ONLY DRY EXTINGUISHERS TO EXTINGUISH THE FIRE.
12. AFTER-SALES SERVICE
Should it be necessary to resort to technical assistance, contact your sales person immediately. If spare parts are
needed, always refer to your after-sales service: insist on the use of original spare parts. Scroll the Italian and
European network of branch offices on the back of this manual for addresses and phone numbers.
13. DISMANTLING AND DISPOSAL
Please, for the sake of the environment, sort the parts and materials composing the display case in accordance
with the waste disposal provisions in force in your country, so that they can be properly disposed of or recycled.All
its parts cannot be treated as solid urban waste, except for the metal parts, which nevertheless are not considered
as special waste by most European countries.
THE PARTS COMPOSING THE REFRIGERATING CIRCUIT MUST NOT BE SEVERED OR SEPARATED BUT DELI-
VERED INTACT TO A CENTRE SPECIALISED IN RECYCLING REFRIGERANT GAS.
24
QUM000115F