Automatic Switch-Off (Sleep Function) - SilverCrest SRWK 800 A1 Mode D'emploi

♦ When the NAP function is activated, press the SLEEP/NAP │
12 / 24 button
alarm time .
♦ When the alarm time has elapsed, an alarm signal sounds and
the display
off the alarm .
NOTE
► To turn off the NAP function before the alarm time ends,
press the SLEEP/NAP │ 12 / 24 button
seconds . Then, press the SLEEP/NAP │12 / 24 button
several times briefly until OFF is shown on the display

Automatic switch-off (SLEEP function)

You can use the SLEEP function to switch off the device automatically
after 5–120 minutes .
♦ Press the SLEEP/NAP │ 12 / 24 button
120 appear on the display
♦ Press the SLEEP/NAP │12 / 24 button
SLEEP time (120, 90, 60, 30, 15, 10, 5 minutes) . After about 3
seconds, the normal display appears again and the SLEEP function
is started automatically . SLEEP appears on the top of the display
After the set time, the device will switch itself off automatically .
♦ While the SLEEP function is activated, press the SLEEP/NAP │
12 / 24 button
device switches off .
♦ To deactivate the SLEEP function, press the SLEEP/NAP │
12 / 24 button
or switch off the device with the
■ 56 │ GB │ IE
for about 2 seconds to show the remaining
8
shows ZZZ . Press the
1
8 briefly
repeatedly until OFF is shown on the display
8
/AMS button
8
.
1
8
to show the remaining time until the
/AMS button
to switch
4
for about 2
8
1
briefly . SLEEP and
repeatedly to set the
.
4
SRWK 800 A1
8
.
.
1
1