Troubleshooting; Cable Connection Is Impossible; Operation Is Impossible - Hamamatsu PDE C9830 Manuel D'utilisation

8

Troubleshooting

If an abnormality occurs, look up the possible causes in the following tables and, if necessary, report the de-
tails to your local distributor.

8.1 Cable connection is impossible

Possible Cause
The camera cable and the remote con-
troller cable are used in the wrong posi-
tions (mistakenly interchanged).
Misuse of male with female side.

8.2 Operation is impossible

Power supply LED doesn't light
Possible Cause
Fuse has blown.
Improper connection of the power supply
cord.
Damaged Power supply cord.
Damaged LED circuit.
Damaged power switch.
Image does not appear on the video monitor
Possible Cause
Improper cable connection.
Damage in the Camera Cable or Power
supply cord.
(In the case of a dark image)
Brightness level is too low.
(In the case of a white image)
Contrast level is too high.
Instruction Manual PDE
Version 1.30E
Measures
Use the correct cables.
Connect the correct sides.
Measures
Replace the fuse.
Reconnect the cord firmly
with the AC inlet and wall
socket.
Contact your local
distributor.
Measures
Reconnect the cables after
turning off the power.
Contact your local distribu-
tor.
Increase the brightness
level.
Decrease the contrast
level.
Troubleshooting
Chapter
5
-
Chapter
7-1
5
-
Chapter
-
6-3
6-3
Page 8-29