Controller (Front Panel); Figure 4-2: Controller Front Panel - Hamamatsu PDE C9830 Manuel D'utilisation

Names And Functions Of PDE Parts

4.2 Controller (Front Panel)

②
①
③

Figure 4-2: Controller front panel

1 Power Switch
The switch to turn the power to the system ON and OFF.
Pressing the "|" side of the switch turns ON the power. Pressing the "○" side of the switch turns OFF the po-
wer.
2 Power Indicator
The Green LED to indicate that the power is ON
3 Noise Reduction Switch
The switch to turn ON/OFF the Noise Reduction function to reduce the noise of the observed images
Note
4 Noise Reduction Indicator
The Green LED to indicate that the Noise Reduction function is ON.
5 Camera Cable Connector
The Camera Cable, which connects the Controller with the Camera Unit, is connected here.
Page 4-12
④
When the power supply has been turned OFF, wait at least 10 seconds before
turning it ON again.
An inter-frame image filter is used for Noise Reduction. So, if the camera unit is
moved while the Noise Reduction function is operating, the displayed image may
trail behind the movement.
⑤
Instruction Manual PDE
Version 1.30E