Adjusting The Shock Setting; Setting The Parking Brake - BOB RAMBLER Guide De L'utilisateur

BOB Gear by Britax

Adjusting the Shock Setting

1� Remove Child From Seat
2� Set Shock Setting
Depress shock release knob
and simultaneously pull toward
back of stroller, sliding knob
into preferred position. Knob will
snap into place when in correct
position.
Position 1 is a SOFTER shock
setting recommended for
children 40 lbs (18�1 kg) or less�
Position 2 is a FIRMER shock
setting recommended for
children weighing 41 to 75 lbs
(18�2 - 34 kg)
NOTE: Every time the stroller is
folded, stroller shocks default to
position 1.
3� REPEAT on opposite side�
10

Setting the Parking Brake

The parking brake prevents the
stroller from moving while loading
and unloading. The parking brake is
not designed as a stopping brake.
To set the parking brake, press down
on the foot pedal – making sure the
locking pin fully engages the locking
disk.
LOCKED POSITION
To ensure the brake is set properly,
attempt to roll the stroller forward
and backward after setting the
brake. If the stroller will not roll, the
brake is set properly.
To release the parking brake, lift up
on the foot pedal with your foot until
the brake bar springs up into the fully
unlocked position.
UNLOCKED POSITION