Battery Removal - Silk-n Pure Deluxe H4101 Mode D'emploi

The battery is to be disposed of safely.
C
Attention should be drawn to the
C
environmental
disposal. Don't throw used batteries in
a dustbin. Please contact your retailer in
order to protect the environment.

Battery Removal

To remove the battery, the device must
be broken apart. The device will no longer
function after this procedure, nor can it be
repaired. Any warranty will be void when the
appliance housing is broken and the battery
is removed. It is strongly recommended to
wear safety protective goggles and gloves.
Silk'n is not liable for any physical or material
damages as a result of performing this
procedure.
To remove the battery place the device on
a hard, strong surface. Use a hammer to hit
the appliance on the seam and continue to
do so along the whole seam on both sides
of the device.
Once the seam is sufficiently broken, use
pliers or a screwdriver to take the housing
apart. Unscrew the PCB (printed circuit board)
and remove the battery by disconnecting
the plug from the PCB.
aspects of
5
battery
EN