Güde SG 130 A Traduction Du Mode D'emploi D'origine page 29

Keep the machine out of reach of children.
Keep dry at all times. Never expose tool
to rain.
~ ~
1 1 Single-phase transformer
MIG (welding, metal-inert-gas)
MAG (welding, metal-active-gas)
Single-phase alternating current with
GPS 40A rated frequency of 50 Hz
V
Voltage
AC Current
10A/84V
No gas
40A
370V
96V
Wire feeder
30A
Fan
Class H
Artikelnummer: 20063
Baujahr: 2017
Suitable for welding with an increased
Seriennummer:
electric risk.
Any damaged or disposed electric or
Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
electronic devices must be delivered to
appropriate collection centres.
CE marking
40A/26V
25.8A 20A
90.3V 88V
15A
TÜV / GS conformity mark
MAINTENANCE
Machine to be always unplugged before
any adjustment and servicing work on it.
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
WARNING The appliance must not be used if da-
maged or safety equipment is defective. Replace any
worn-out and damaged parts.
If the device is defective, the repair has to be made
exclusively by the customer service.
Use only original accessories and original spare parts.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Use a soft brush to remove the deposited dust from
the ventilation hole and moving parts after each use.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
Storage
The appliance must be stored in a dry place and
protected from frost.
Leave the device to cool after use.
Do not cover the device directly after use or place in
a cabinet.
Lock the device in a proper place to protect it from
unauthorised use.
Disposal
The disposal instructions are based on the icons
placed on the appliance or its package.
Transport packaging disposal
The packaging protects the machine against damage
during transport. Packaging materials are usually
chosen based on environment aspects and waste
treatment principles and are therefore recyclable.
Returning the packaging into material circulation saves
raw materials and reduces waste production. Parts of
packagings (e.g. foils, styropor®) can be dangerous for
children.
Do not dispose of electrical appliances in household
waste; use the local collection points. Ask your local
authority where the collection points are to be found. If
electrical equipment is disposed of in an uncontrolled
manner, weathering can lead to dangerous substances
entering the groundwater and from there the food
chain, or the flora and fauna can be poisoned for years.
If you replace the device with a new one, the seller is
legally obliged at the least to take back the old one to
be disposed of free of charge.
ENGLISH
25