How To Clean The Motor Filter - Clarke FiltraPac Manuel De L'utilisateur

ENGLISH
EN
MAINTENANCE

How To Clean The Motor Filter

Clean the motor filter whenever it is dirty. To clean the
motor filter, follow this procedure:
1. Open the tank assembly.
2. Remove the filter bag.
3. Pull the filter cover off the filter disc.
4. Remove the filter.
5. Wash the filter in water.
6. Put the filter in a cloth and apply pressure to dry
the filter.
7. Put the filter in the filter cover.
NOTE: Install the filter cover with the opening
toward the back of the tank housing. See
figure 6.
CAUTION: Check the motor protection filter
while changing the paper bag. Please change
the motor protection filter after use of 6 paper
bags.
8. Install the filter bag.
9. Close the tank assembly.
-8-
Figure 6
® Operator's Manual (EN) - FiltraPac
Clarke