How To Clean The Filter Cartridge; How To Replace The Brush; Comment Nettoyer La Cartouche Du Filtre - Clarke D14 Manuel D'utilisation

ENGLISH
EN
How To Change The Filter Cartridge
Change the filter cartridge whenever it is dirty or suction
performance decreases. To change the filter cartridge,
follow this procedure:
1. Make sure the ON/OFF switch is in the "O"
position and the machine is disconnected from
the power supply.
2. Open the canister door.
3. Remove the filter bag.
4. Remove the filter cartridge (see figure 20).
5. Replace filter cartridge and filter bag (see figure
21).
CAUTION: Check the filter cartridge while
changing the paper bag. Replace the filter
cartridge when dirty or when the vacuum
suction performance drops off even with a
clean filter bag.

How To Replace The Brush

WARNING: To prevent injury, unplug machine
before cleaning or replacing brush. Brush
may start suddenly and cause injury.
1. Put the machine on its side.
2. Turn the knobs which secure the nozzle plate.
See figure 22.
3. Lift the nozzle plate up to remove it.
4. Lift the brush assembly up to remove it.
5. Install the new brush assembly.
6. Install the nozzle plate.
7. Put the machine on its wheels.
WARNING: To reduce the risk of injury from
moving parts, unplug before servicing.
Page -12-
Figure 20
Figure 21
Figure 22
®
Clarke
Operator's Manual (EN) - D14 & D18