Technical Data - Kopp NFRAcontrol R 180 UP Mode D'emploi

Technical data

Nominal voltage:
Permanent current:
Switching contact:
Frequency:
Standby power:
Detection angle:
Lens design:
Detection range: (at 20°C)
Recommended installation height:
Duty cycle (delay time):
Twilight threshold:
Connection equipment:
Connection type:
Settings:
Switch-off warning:
Fuse:
Switching capacity:
230 V~; +-5%
max. 10 A
normally open contact (μ opening width)
50 Hz
< 1 W
180°
3 levels
approx. 9 m with an installation height of approx. 1.2 - 1.5 m
approx. 8 m with an installation height of approx. 1.5 - 2 m
1,2 m to 2 m
5 levels: 20 sec / 1 min / 5 min / 15 min / 30 min
Test function: 2 sec.
Pulse ( ): 1 sec ON / 9 sec OFF
5 to 1000 Lux
Save function ambient brightness
Basic wiring: 3 wires (L, N, connection for consumers) Manual ON by means of
button activation: 4 wires (L, N, connection for consumers, button connection)
screw terminals
ON: permanent ON for 2h
OFF: permanent OFF
AUTO: automatic
≤ 15 sec.: 1x brief tone
≤ 10 sec.: 2x brief tones
≤ 5 sec.: 3x brief tones.
safety fuse T 10 A / 250 V. Dimensions (5 x 20) mm
max. 1000 W (resistive load)
D
GB
NL
F
I
P
25