Assembly Instructions - Mosquito Magnet PATRIOT PLUS Manuel De L'utilisateur

Assembly Instructions

Step 1
Place base upside down on a flat
surface, slide U-shaped support
legs into slots on base until they
lock in place.
Step 5
Insert attractant as directed in
attractant packaging.
Step 2
Turn base and leg assembly
right-side-up and place support
pole into cavity on base.
Step 6
Place the base of the propane
tank into the molded cradle
supplied.
Step 9
Plug Adapter into properly
grounded electrical outlet.
Step 3
Place trap power head onto
pole. Press down firmly with two
hands to secure.
Step 7
Making sure propane tank is fully
closed, attach propane regulator
hose to propane tank. Secure
tightly by hand. Do not use tools.
Step 10
Turn propane valve on slowly.
See page 8 for propane tank
installation.
Step 4
Completed assembly should have
the front of power head in the same
direction as base U-shaped legs.
Step 8
Plug power connector into the
trap power slot located on the
back of the power head.
6