Mosquito Magnet PATRIOT PLUS Manuel De L'utilisateur page 5

Safety Instructions
• Maintain adequate clearances of 50-60 cm (20"-24")
around air openings into the combustion chamber, clearances
from combustible material, provisions for accessibility and for
combustion and ventilating air supply. Keep the trap area clear
and free from combustible materials, gasoline, and other
flammable vapors and liquids. The appliance is not to be used
in locations where flammable vapor or explosive dust is likely to
exist.
• Do not obstruct the flow of combustion and ventilation air.
• Keep the ventilating openings of the cylinder enclosure free
and clear from debris.
• Clean the trap with a damp cloth, if necessary.
• A maximum of a 9 kg (20 lb.) LP-Gas cylinder shall be used.
• The LP-Gas cylinder must be provided with a shut-off valve
terminating in an LP-Gas supply cylinder valve
outlet specified for Connection No. 510 in the Standard for
Compressed Gas Cylinder Valve Outlet and Inlet Connections,
ANSI/CGA-V-1-1977.
• The LP-Gas cylinder supply system must be arranged for
vapor withdrawal and the cylinder must include a collar to
protect the cylinder valve.
• The LP-Gas cylinder used shall be constructed and marked
in accordance with the specifications for LP-Gas cylinders of
the U.S. Department of Transportation (DOT) or The National
Standard of Canada CAN/CSA-B339.
• The trap shall be used outdoors only in a well ventilated
space and shall not be used in a building, garage, or any other
enclosed area.
• The LP-Gas cylinder must be disconnected and removed
from the appliance, if the appliance is stored indoors.
• LP-Gas cylinders must be stored outdoors in a well-
ventilated area out of reach of children.
• Disconnected cylinders must have threaded valve plugs
tightly installed and must not be stored in a building, garage, or
any other enclosed area.
• The pressure regulator and hose assembly supplied with
this appliance must be used for connection to the LP-Gas
cylinder. Replacement pressure regulators and hose
assemblies must be specified by the manufacturer.
• Avoid improper use of extension cords. Keep connections
away from moisture and avoid damage to the cord.
• If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified
person in order to avoid hazard.
Please contact Customer Care
if you have any questions at:
1-800-953-5737
or visit www.mosquitomagnet.com
Warning:
SHOCK! An electric shock hazard
may exist if water from a garden hose is directed at
the Mosquito Magnet Patriot . Route the power cord in the
®
safest possible manner to avoid personal injury.
4