Assembly Instructions - Mosquito Magnet INDEPENDENCE Manuel De L'utilisateur

Assembly Instructions

Trap Assembly:
Step 1
Place base upside down on a flat surface, unfold
U-shaped support leg until it locks in place.
Step 2
Turn base and leg assembly right-side-up and place
support pole into cavity on base.
Step 3
Place trap power head onto pole. Press down firmly
with two hands to secure.
Assembled trap should have the front of power
head/trumpet placed farthest from the wheels in the
same direction as base U-shaped legs.
Step 4
Open battery door in the rear of the trap.
Step 5
Place four (4) "C" batteries in the battery cage.
Insert battery cage connector in the power
receptacle until it latches, then insert the battery
cage in the opening.
Step 6
Close battery door when complete (snaps into place).
6