Delivery, Storage, Transport; Delivery - Brüel & Kjaer Vibro ds822 Serie Mode D'emploi

3 Delivery, storage, transport

Observe the safety information in chapter "Safety"!
3.1

Delivery

Check the packaging for damage upon delivery and make sure that the contents are complete.
Components included in scope of
Supplied components
Displacement sensor
Protection cap
a
2 nuts
b
1 sealing ring
c
Extension cable
Driver
Assembly adapter
Acceptance test certifi-
cate acc. to DIN EN
10204
Measurement protocol
(works calibration)
User Manual
a. not available for ds3003 (sensor for rear-side mounting)
b. only available for ds3003, sensor for rear-side mounting, operating temperature range for o-ring -40 °C to +180 °C,
for lower temperatures down to -55 °C o-ring (silicone) on request.
c. not available if the length of the displacement sensor with integrated cable corresponds to the nominal system length
of 5 m or 10 m.
© Brüel & Kjaer Vibro GmbH / 4 mm ds822 ATEX / 9.11.16 / technical specifications subject to change / C105070001 / V03
supply:
Displacement Extension
sensor
X
X
X
X
X
X
Driver
cable
X
X
X
X X
X X
EN
Complete
displacemen
t sensor
system
X
X
X
X
X
X
X
X
X
X
l
10