4 mm displacement sensor system series ds822 ATEX
EN
Instructions
10 Glossary
10.1 Symbols used and their meanings
N
This symbol provides general and useful information for using the product.
C
This symbol warns of dangerous situations which can result from misuse of the
product.
10.2 Terms used and their meanings
API 67
Extension cable
DSL
EMC
GAP voltage
ISF
Nominal system length
l
37
© Brüel & Kjaer Vibro GmbH /4 mm ds822 ATEX / 9.11.16 / technical specifications subject to change / C105070001/ V03
!
OTE
AUTION
The standard API 670 (Machinery Protection Systems) of
theAmerican Petroleum Institute is directed at manufacturers
and users of machine monitoring systems.
The extension cable connects displacement sensor and driver
and, if present, forms an integral part of the complete system.
Deviation from best fit Straight Line refers to the deviation from
an ideal characteristic curve of the distance measurement (see
API 670).
ElectroMagnetic Compatibility.
The d.c. voltage at the signal terminal of the driver (oscillator/
demodulator) corresponds to the separation (GAP) between
target and sensor tip.
Incremental Scale Factor refers to the precision of the sensitiv-
ity (see API 670).
The nominal system length refers to the distance measured
from the sensor tip of the displacement sensor to the end of the
plug connector that is connected to the driver. It is either 5 m or
10 m. The actual system length is governed by the electrical
| Glossary