Explosion Protection - Brüel & Kjaer Vibro ds822 Serie Mode D'emploi

4.3.1 Connecting and disconnecting plug connections
4.3.2 Connection via extension cable
4.3.3 Direct connection
4.4 Setting up the measuring chain and the displacement sensor
4.4.1 Measurement set-up
4.5 Electrical connection
5 Explosion protection
5.1 Responsibility of the plant operator
6 Functional check
6.1 Quick check
6.2 Troubleshooting
7 Disassembly
7.1 Disconnecting the connecting plugs
7.2 Driver disassembly
7.2.1 Disassembling driver with assembly adapter on hat-rail
7.2.2 Disassembling driver with assembly adapter, screw-mounted
7.3 Replacing displacement sensor system components
8 Disposal
9 Technical data
9.1 Performance data
9.1.1 Non-contacting displacement sensor system Series ds822 ATEX
9.1.2 Dimensioning of assembly adapter
9.2 Environmental requirements
9.2.1 Reliability of the displacement sensor in different media
9.2.2 Properties of the measuring track
9.2.3 Required clearances and minimum distances for displacement sensors
l
2 © Brüel & Kjaer Vibro GmbH/4 mm ds822 ATEX / 9.11.16 /technical specifications subject to change C105070001/V03
EN
17
17
17
18
18
19
22
23
25
25
26
27
27
27
27
27
27
28
30
30
30
31
32
32
33
34