Setting The Video Format; To Change Video Format; To Change Frame Frequency - Panasonic GP-KH232CUE Mode D'emploi

Setting the video format

Starting up the CCU by turning the power switch to ON while holding down the corresponding but-
ton can select the video format for each video output connector. The default video format is
1080/50i.

To change video format

Select the video format.
(Default: 1080/50i)
Turn the power switch to ON while holding down one of the following buttons.
Keep holding down the button until the picture appears on the monitor.
[SCENE] button:
1080/50p (1080/59.94p)
[FREEZE MENU ] button:
1080/50i (1080/59.94i)
[SEL] button:
720/50p (720/59.94p)
[GAIN] button:
1080/25p(sF) (1080/29.97p(sF))
[e] button:
576/50p (480/59.94p)
[f] button:
576/50i (480/59.94i)
Note:
• The setting will be saved even after turning off the power of the CCU.
• This operation is unnecessary when using this unit at a predetermined video format.
• Check that the monitor to be used is compatible with the video format.

To change frame frequency

To change the frame frequency, start up the CCU by turning the power switch to ON while holding
down the [D RANGE [h]] button. When using analog output, keep holding down the button until
the picture appears on the monitor, then release the button. CCU restarts automatically.
Or when using only HDMI output, keep holding down the button for 8 to 12 seconds, then release
the button. CCU restarts automatically.
The frame frequency will be switched to 59.94 Hz.
Each operation can switch the frequency between 59.94 Hz and 50 Hz.
Note:
• The setting will be saved even after turning off the power of the CCU.
• This operation is unnecessary when using this unit at a predetermined frame frequency.
• Check that the monitor to be used is compatible with the video format.
13