Panasonic GP-KH232CUE Mode D'emploi page 11

Pressing for 2 seconds or more: Starts up
AWC while an image is displayed if
"WHITE BAL" in the SETUP menu is set to
"AWC" (☞ page 33).
!0 Left button [e]
This button moves the cursor leftward or
selects a setting while the SETUP menu is
displayed. This button moves the cursor in
the minus direction on the level adjust-
ment scale or selects a setting item while
the SEL menu is displayed. A function of
the SEL menu can also be assigned to
this button. (☞ Page 38)
!1 Right button [f]
This button moves the cursor rightward or
selects a setting while the SETUP menu is
displayed. This button moves the cursor in
the plus direction on the level adjustment
scale or selects a setting item while the
SEL menu is displayed. A function of the
SEL menu can also be assigned to this
button. (☞ Page 38)
<REAR>
!5 RGB/YPbPr output connector
[RGB/YPbPr]
!4 HDMI output
connector [HDMI]
!6 S-video output connector [S-VIDEO]
RGB / YPbPr S-VIDEO REMOTE
!2 Dynamic range/Down button
[D RANGE [h]]
This button toggles the dynamic range
between NORMAL and EXPAND.
"EXPAND" shall be selected when dark
portions are less viewable because too
bright portions are present in a screen.
This button moves the cursor downward
to change a setting item while the SETUP
menu is displayed.
Note:
• The dynamic range can be set in the
scene file. (☞ Page 29)
!3 Camera cable connector
The camera cable (option) is connected to
this connector.
!9 Cable clamp
!8 12 V DC power terminal
[DC 12V IN]
DC 12V IN
!7 Remote terminal [REMOTE]
11