Declaration Of Conformity - Shure VP SYSTEM PORTATIF SANS FIL Guide Rapide

We of
declare under our sole responsibility that the following product,
was tested and found to comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, in-
cluding interference that may cause undesired operation.
Testing was completed by the following NVLAP or A2LA accredited laboratory:
Shure Inc., Manufacturer.
Signed:
Name, Title: Craig Kozokar, Senior Quality Engineer
Additional Information for this Shure Wireless System
This Shure wireless transmitter is accepted under FCC Part 74 and/or Part 90.
IMPORTANT: Licensing of Shure wireless microphone equipment is the user's
responsibility, and licensability depends on the user's classification and ap-
plication, and on the selected frequency. Shure urges the user to consult the ap-
propriate telecommunications authority before choosing and ordering frequencies.
Changes or modifications not expressly approved by Shure Inc. could void your au-
thority to operate this equipment.
The information on this page supersedes the corresponding information in your
Shure user's guide.
English

Declaration of Conformity

Shure Incorporated
222 Hartrey Ave.
Evanston IL 60202–3696 U.S.A.
847–866–2200
Model: VP3
D.L.S. Electronic Systems, Inc.
1250 Peterson Drive
wheeling, Illinois 60090, U.S.A.
At the test location of
D.L.S. Electronic Systems, Inc.
166 South Carter
Genoa City, Wisconsin, 53128, U.S.A.,
Test Sites Number 1 and 2
Name: VP3 Receiver
Date: June 15, 1999
– 12 –
English