Adjustment - Eccotemp CEI-12 Manuel D'utilisation Et D'entretien

Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483

Adjustment

The temperature of the outgoing water is dependent on the temperature of the incoming water
balanced with the amount of heat applied. Use extreme caution in setting the outlet water
temperature.
1. With the water regulator set to high, and the gas regulator set to low, feel
the outgoing water. This is the lowest setting available.
2. To initially raise the outgoing temperature, slowly turn the gas valve
towards maximum. Adjust slowly and check the temperature often. There
will be a slight delay between increasing the gas supply and the increase in
water temperature.
3. Should the outlet water temperature need to be higher, slowly reduce the
water flow regulator until desired temperature is reached.
(Warning: Do not alter or change this water heater's original temperature sensor)
WARNING: THE UNIT IS CAPABLE OF PRODUCING
SCALDING WATER TEMPERATURES!
20
Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator