DISPLAY BACK LIGHT
1. Press the MENU button until "LED" is displayed, press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or DOWN buttons to select "ON" to keep the LED
display on at all times, or "OFF" to switch to have the LED display switch off after 10 seconds.
3. Press ENTER and then press and hold the MENU button for at least three seconds to confirm.
DISPLAY REVERSE 180°
1. Press the either the MENU button until "DISP" is displayed, press ENTER.
2. Press the UP button to select "DSIP" to reverse the display, or "DISP" to change the display back.
3. Press ENTER to confirm.
SELF TEST PROGRAM
1. Press the MENU button until "TEST" is displayed, press ENTER.
2. The fixture will now run a self test. Press MENU to exit.
RESET
Press the MENU button until "Reset" is displayed. Press the ENTER button and the unit will reset itself.
DMX CHANNEL TABLE: SEE AT THE END OF THE MANUAL
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit's optics.
•
Clean with soft cloth using normal glass cleaning fluid.
•
Always dry the parts carefully.
•
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
SPECIFICATIONS
Power supply ...................................................................................................................100-240V~ 50/60Hz
Consumption ....................................................................................................................................80W max.
Fuse .............................................................................................................................................................2A
Light source .............................................................................................................6x 10W RGBW 4-in-1 LED
Pan ........................................................................................................................................................... 540°
Tilt ............................................................................................................................................................. 90°
Beam angle .................................................................................................................................................. 4°
Dimensions ......................................................................................................................225 x 145 x 220mm
Weight ................................................................................................................................................... 3,38kg
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed.
6
Manual - QUAD6-LED
©Copyright LOTRONIC 2020