Remote Control; Lcd Display - Ibiza Light COMBI-STUV Manuel D'utilisation

Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to
avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the
unit is secure and is able to support a weight of 10 times of the unit's weight.
Operation
All functions and operations can be controlled manually on display without DMX controller.
Enter into menu by pressing the MENU button and select the menu item via the up and down keys. Press the
ENTER button to confirm your choice. Increase or decrease the value via the UP/DOWN keys. Press ENTER to
confirm and exit the menu.
Remote-control
Please note: The IR sensor is placed on the front of the unit. So please point the remote to the front.
Button functions:
AUTO > Toggles between AUTO 1 and AUTO 2 mode
SOUND > Toggles between SOUND 1 and SOUND 2 mode
LED > Selection of the different colors of the DERBY effect from LE 1 to LE7
LS > no function
UV > Switches the 6x UV LEDs on and off.
Flash > Press to switch the strobe on/off. The flash speed increases at every press on
the button until it switches off.
MOTOR +/- > increases/reduces the motor speed of the derby effect
SPEED +/- > increases/reduces the flash speed of the strobe
SEN +/- > Only in Sound mode: increases/reduces the sensitivity

LCD DISPLAY

No. Menu
LE *
1
Derby Mode
© Copyright LOTRONIC 2018
LE 1 Red – warm white – light blue
LE 2 White – amber - orange
LE 3 Green - blue - purple
LE 4 3 color change
LE 5 Color mixing jump change
LE 6 Strobe
LE 7 Auto, repeat LE 4~6 mode
Sd 1~9 Strobe, LE 4~7 Speed adjustment
Strobe, Motor(Derby) speed adjustment,
SP 1~9
Value +,Speed +
COMBI-STUV
Function Note
Press "Enter" to confirm
Press "Enter" to confirm
3