Remote Control - EdilKamin INPELLET 54 Installation, Usage Et Maintenance

REMOTE CONTROL

This controls all the functions.
Key to buttons and display:
: to turn off and on (to go from remote control on stand-by to remote control on)
+/-
: to increase/decrease the various regulations
A : to select Automatic function
: to select Manual function and access the control and programming menus
M
The display also shows other useful information in addition to the icons described above.
- Stand-by position:
shows room temperature (20°C), kg of pellets (15 kg) remaining in tank and current time (15.33)
- Manual work phase:
shows power set (Power 1), room temperature (20°C), kg of pellets and autonomy remaining (15 kg 21 hrs)
- Automatic work phase:
shows temperature set (Set 22°C), room temperature (20°C), kg of pellets and autonomy remaining (15 kg 21 hrs).
DO NOT PRESS THE BUTTON MORE THAN ONCE
Note: If the radio control is not used for a few seconds, the display will go dark as it has moved into the power saving
function. The display can be reactivated by pressing any button.
INSTRUCTIONS FOR USE
28
- icon flashing: remote control searching for network
- icon fixed: remote control with connection enabled
flat battery
(3 mini alkaline batteries type AAA)
keypad locked
(press "A" and "M" in parallel for a few seconds to lock
or unlock the keypad)
programming enabled
alphanumeric display consisting
of 16 figures arranged in two lines
of 8 figures
- icon flashing: Insert turning on
- icon fixed: Insert working
manual adjustment function
(display shows working power)
automatic function
(display shows temperature)
.