Software Version - Ibiza Light COMBI-FX3 Manuel D'utilisation

4. Press ENTER to confirm, or press «MENU» to exit
Master-slave setting
1. Press <MENU>
2. Press <UP/DOWN> to choose [SLnd], press ENTER
3. Press <UP/DOWN> to choose Mast/SL1/SL2
4. Press <Enter> to confirm, or press «MENU» to exit.
Sound mode setting
1. Press <MENU>
2. Press <UP/DOWN> to choose [SoUn], press ENTER
3. Select So 0 ..... So7 for the sound programs
Sound sensitivity Setting (before this setting, press MENU, select <SoUn> and save. You must be in Sound
Mode first, before you can select the sensitivity)
1. Press MENU
2. Press UP/DOWN to choose [Sens], press ENTER
3. Press <Up/Down>, <Enter> to adjust the sound sensitivity from Se99 to Se 0.
4. Press <Enter> to confirm, or press «MENU» to exit.
AUTO mode setting:
1. Press MENU.
2. Press UP/DOWN to choose [AUTO], press ENTER
3. Press<Up/Down> to select an automatic program from Au 0 to Au 7
4. Press enter to set the speed from SP0 to SP9
5. Press <Enter> to confirm, or press «MENU» to exit.
LED display setting: Choose OFF if you want the display to switch off after 30 seconds of non-use.
1. Press MENU.
2. Press UP/DOWN to choose [LED], press ENTER
3. Press<Up/Down> to choose 'ON' or 'OFF'
4. Press <Enter> to confirm, or press «MENU» to exit.
Display reverse setting
1. Press MENU.
2 .Press UP/DOWN to choose [dISP] or [dSIP], press ENTER

Software Version

1. Press < ENTER>
2. Press < UP/DOWN> to select [Ver], then press < ENTER>to check the light's version information
3. Press <Enter> to confirm, or press «MENU» to exit.
MENU
Addr A001
ChNd 9Ch
Slnd Mast
Soun So 0
Se99
Auto Au 0
4
A512
17Ch
Sl 1 Sl 2
So 7
Se 0
Au 7 SP0
©Copyright LOTRONIC 2019
ENGLISH
Address code selection
Number of DMX channels
Choose Master/Slave unit
Sound effect
Sound sensitivity
Auto effect