Teuco S01 Manuel De L'utilisateur page 39

Amber LED flashing. The
alarms menu reads "ERR42
"
Amber LED flashing. The
alarms menu reads "FILLING
TIME OUT"
- Press EXIT or OK to return to the
INFO MENU.
ANY MESSAGES NOT MENTIONED IN THE LIST ARE OF A "SPECIALIST" NATURE. RE-SET THE SYSTEM
ELECTRONICS BY DISCONNECTING IT BRIEFLY FROM THE MAINS POWER SUPPLY (USING THE MAIN
SWITCH, WHICH IS NOT SUPPLIED BUT NECESSARY ACCORDING TO INSTALLATION STANDARDS).SI LE
PROBLEME PERSISTE, CONTACTER LE SERVICE APRES-VENTE.
INSTRUCTIONS FOR USE
SECONDARY FUNCTIONS
ALARMS
No hot water is flowing to the filling device. Check
the correct installation and the actual availability of
hot water (>20°C).
If the problem persists, call the technical assistance
service.
The automatic filling device has failed to fill the
tub within the 60-minute time limit. Make sure
that the waste is closed and that water is flowing
correctly to the product (see pre-installation sheet).
If the problem persists, call the technical assistance
service.
EN
INFO
39