Sound Functions - Teuco S01 Manuel De L'utilisateur

EN INSTRUCTIONS FOR USE

SOUND FUNCTIONS

The AUDIO function activates the amplification system of the audio signal coming from external sources
/e.g., ipod) connected by the aux interface or Bluetooth®.
- From the READY MENU, select the
AUDIO icon by utilising the arrow keys
to shift the cursor. Press the OK key to
confirm.
- The amplification system switches on.
- The icon that flashes indicates that the
function is active.
- If no keys are pressed for more than 5
minutes, the panel returns to the MAIN
MENU.
- To deactivate the amplification system,
select the AUDIO icon using the arrow
keys to shift the cursor. Press the OK
key to confirm.
- The amplification system switches off.
- If no keys are pressed for more than 5
minutes, the panel returns to the MAIN
MENU.
THE AUX CONNECTION BETWEEN THE AUDIO SOURCE AND THE AMPLIFICATION SYSTEM IS MADE USING THE
CABLE SUPPLIED WITH A MINI-JACK THAT IS SUPPLIED AS STANDARD WITH THE PRODUCT.
THERE IS NO VOLUME ADJUSTMENT OF THE MINIPOOL'S SOUND SYSTEM. ALWAYS USE AN EXTERNAL SOUND
SOURCE EQUIPPED WITH A VOLUME ADJUSTMENT.
THE AMPLIFIER DOES NOT HAVE A VOLUME CONTROL THEREFORE THE SOURCE DEVICE TO WHICH IT IS
CONNECTED MUST HAVE A VOLUME CONTROL.
IF THE SOURCE DEVICE DOES NOT HAVE A VOLUME CONTROL, THE SOUND EMISSION WILL BE AT MAXIMUM
VOLUME WITH CONSEQUENT DISTORSION AND POSSIBLE DAMAGE TO THE SPEAKERS.
THE SOUND FUNCTION IS EQUIPPED WITH A SELF-CANCELLING DEVICE THAT ACTIVATES THREE HOURS AFTER
THE SOUND SYSTEM HAS BEEN SWITCHED ON.
18
AUDIO
5min.