Lock 30 - Teuco S01 Manuel De L'utilisateur

EN INSTRUCTIONS FOR USE
SECONDARY FUNCTIONS
INFO
The LOCK 30 setting locks down all control panel functions for 30 minutes with the exception of the
INFO MENU. This function is useful during cleaning operations, when replacing filters and to temporarily
interrupt the water and massage functions on the hot tub/minipool.
- From the INFO MENU select the LOCK
icon, using the arrows to move the
cursor.
- Press OK to confirm.
- From the LOCK MENU select the
LOCK 30 icon, using the RIGHT-LEFT
arrows to move the cursor.
- Press OK to confirm.
- Press HOME four times to insert the
activation/deactivation key of the LOCK
30 function.
- Press OK to confirm.
- The display will pass to the LOCK
MENU.
- After 30 seconds, the LOCK 30 function
will switch on.
- The flashing LOCK 30 icon and the
symbol followed by a countdown show that
the LOCK 30 function is on.
- Press EXIT to return to READY MENU
mode.
- If no buttons are pressed for 15 seconds
the panel will return to READY MENU
mode.
IT IS NOT POSSIBLE TO ACTIVATE TWO LOCK FUNCTIONS AT THE SAME TIME.
THE "LOCK 30" FUNCTION LASTS FOR 30 MINUTES. TO DISACTIVATE IT BEFOREHAND, PRESS "INFO" TO
RETURN TO THE "LOCK MENU" AND RE-ENTER THE ACTIVATION / DISACTIVATION CODE.
NEVER USE "LOCK 30" FOR CLEANING/SERVICING OPERATIONS LASTING MORE THAN 30 MINUTES.
32

LOCK 30

x4
15sec.